Standard Installations
Swash 1400 and 1200
Swash SE600/DS725/CL950
Swash SE400/IS707/CL510
Swash 300, 900, CL825, and 1000
Swash EM617
Swash DR802
Swash BL97
Swash LT99
Swash LT89
Swash LE99
Swash LE89
Swash CL1500
Swash CL1700
Swash CSG15
Swash T44, T66, CL2200, LS1800
Swash T22 & LS1600
Omigo & Omigo SL
Omigo GS
Non-Standard Installations
What about alternative installation? (For skirted toilets with no access to the tank or the toilet seat mounting bolts.)
All Brondell Electric Bidet products include plumbing and mounting hardware to install the bidet on a traditional toilet. However, many modern toilets have sleek designs intended to cover and camouflage plumbing connections, which makes a typical installation difficult or impossible.
- For skirted toilets without access to the below-tank valve, we recommend using our Swash Alternative Replacement T-Valve option, found here. The T-Valve will connect at the shut-off valve at the wall instead of under the toilet tank.
- If your fixture has top-side access to the mounting bolts that hold the seat to the toilet, you will likely need top-mount hardware, found here. (The following products do not require this hardware: SE400, SE600, CL510, DS725, IS707, CL950 CL2200, T44, LS1800, T22, LS1600)
- Check the water supply line that connects your toilet tank fill valve to the water shutoff valve at the wall. If it is a rigid pipe, you will need to purchase a flexible water supply hose to replace it before installing the Swash.
What if I need alternate hardware?
Please contact us if you need alternate parts for your installation, as we provide approved alternate hardware as needed. Using third-party parts may damage or prevent the Swash from working properly. For that reason, substituting unapproved parts will void your warranty, and Brondell will not be held liable for damages.