Will the LumaWarm fit my toilet?
The LumaWarm heated toilet seat fits all standard Round and Elongated toilet bowls. Use the diagram above to measure your toilet to see if you have the Round or Elongated size bowl.
The measurement between the 2 bolt holes (bolt spread) must be the standard US size of 5-1/2 inches or the European size of 6-1/4 inches for the LumaWarm seat to mount properly.
NOTE: The LumaWarm is not compatible with toilet seat risers. However, we do sell top mount hardware separately HERE.
Can the LumaWarm be used with a seat elevator (riser)?
The LumaWarm is not compatible with toilet seat risers. However, we do sell top mount hardware separately HERE
I see that you have Filters listed as Parts and Accessories for the Heated Toilet Seats. What are these and do I need them?
Brondell previously manufactured a heated deodorizing toilet seat called the Breeza Warm. The deodorizing feature utilized filters to eliminate odors and add pleasant scents to your bathroom. Though the Breeza toilet seat line has been discontinued and the seats are no longer being manufactured, we still have these accessories available for customers that need new vents and filters.
How do I know if I need the LumaWarm Top-Mount Hardware?
The top-mount hardware is required if you have a skirted toilet or very limited access to the underside of the toilet bowl, making it impossible to tighten nuts that secure the toilet seat bolts.
Can the LumaWarm be installed with a Brondell bidet?
What are the electrical requirements?
LumaWarm Heated Nightlight Toilet Seats must be plugged into a standard GFCI (Ground Fault Circuit Interrupt) outlet. The GFCI outlet is generally required in bathrooms, kitchens, and near sources of water. LumaWarm users typically need an outlet within three and a half feet of the toilet fixture; though running an extension cord is perfectly acceptable as well (see below). We recommend a minimum of 15 amps for the circuit for the LumaWarm.
If you don't have a GFCI outlet in the bathroom, you can easily purchase an inexpensive GFCI adapter online at Amazon.com or at your local hardware store
While we recommend installing a dedicated outlet near your toilet fixture, If you need to use an extension cord with an existing outlet, we suggest you use the shortest cord length available. The extension cord should only be a 3 prong heavy duty cord that can handle a 15-20 amp load with a gauge of 10-12. You may want to use a cord concealing kit.
Installing a New GFCI Outlet
An optimum outlet placement would be behind the toilet fixture on the right or left hand side depending on which product you purchase.
To find a licensed electrician in your area, please use our preferred partner eLocal.com by clicking on the link below: