Will the LumaWarm fit my toilet?
Toilet Fit information can be found HERE.
What installation is required?
Installing LumaWarm is simple: Remove your existing toilet seat. Screw in the enclosed LumaWarm mounting bolts. The LumaWarm has 2 different keyway options for multiple bolt spreads to slide into the bolts once they’re firmly installed on the toilet. Consult your owner manual for visuals.
LumaWarm Heated Nightlight Toilet Seats must be plugged into a standard GFCI (Ground Fault Circuit Interrupt) outlet. The GFCI outlet is generally required in bathrooms, kitchens, and near sources of water.
LumaWarm users typically need an outlet within three and a half feet of the toilet fixture, though running an extension cord is perfectly acceptable as well. We recommend a minimum of 15 amps for the circuit for the LumaWarm.
If you don't have a GFCI outlet in the bathroom, you can easily purchase an inexpensive GFCI adapter online at Amazon.com or at your local hardware store.
While we recommend installing a dedicated outlet near your toilet fixture, If you need to use an extension cord with an existing outlet, we suggest you use the shortest cord length available. The extension cord should only be a 3-prong heavy duty cord that can handle a 15-20 amp load with a gauge of 10-12. You may want to use a cord concealing kit.
What are the plumbing requirements of the LumaWarm?
There are no plumbing requirements for LumaWarm outside of your toilet’s fit. Fit guide can be found HERE.
Do I need an electrical outlet?
The LumaWarm does require an electrical outlet, operating on a standard 120 volts AC. You will need a three-prong GFCI grounded outlet (e.g., outlet with an internal safety breaker, common in kitchens and bathrooms). If your outlet is more than three and a half feet from the toilet, you will need a grounded extension cord to operate your unit. For those customers interested in installing a new outlet specifically for the LumaWarm, the optimum location when facing your toilet fixture is to the right side of the fixture underneath the toilet tank. For more information, see the "INSTALLATION" tab on each product page.
How much electricity does the LumaWarm use?
The LumaWarm uses 55 watts. Additional information on Electrical Requirements can be found on the "INSTALLATION" tab on each product page or in the owner manual.
How long is the power cord? What side of the LumaWarm is the power cord on?
On the LumaWarm, the power cord extends from the left side of the LumaWarm when facing the toilet. The power cord is 4 feet long.
What are the interior hole dimensions of the LumaWarm seat?
The interior hole of the elongated-size LumaWarm is 11.5”L x 8”W. The interior hole of the round-size LumaWarm is 10.75” x 8”.
Is your LumaWarm compatible with seat elevators or toilet seat risers?
Due to a unique mounting system, LumaWarm is not compatible with any risers as of right now.
What colors are available for the LumaWarm?
The LumaWarm is available in white and biscuit. If you are looking to match your new LumaWarm with an existing toilet, our color recommendations for American Standard, Kohler, and Toto toilets are as follows:
American Standard: White
Toto: Between Colonial White and Cotton (not a perfect match)
American Standard: Linen
Toto: Sedona Beige