Please check the following common troubleshooting steps:
- Make sure you are fully seated when starting a wash, and in contact with the seat sensor.
- Make sure the water supply is turned on.
- Check to see if the nozzles are extending for a wash.
- Check to see if a wash initiates but stops shortly thereafter.
If this does not resolve your issue, please contact Brondell Customer Support.
my Brondell CL 950 has stopped spraying water through the nozzle. There is water dripping from the air vent when I turn the wash on. I removed the seat, and re- installed it , cleaned nozzles and filter and no change. i purchased this in May 2021 through Cost6
co. Please help.